Tuesday, January 31, 2017
A few weekends ago, I finally decided to make a little table for my computer. I already had the piece of wood. I took it to my brother, who cut it to size 34x24, cut the corners off and sanded it for me. He also attached the flanges (I think that's what they are called) on the bottom. So, all I had to do is screw in the metal pipes and Mod Podge it.
I ripped up a lot of different pages as you can see from the following pictures.
Old song pages...
Old survey pages...
Here you can see the shine after it was done. I did 2 coats of Mod Podge, then 2 coats of Polycrylic protective finish in clear gloss. You have to let each coat dry for a day.
These are the flanges (discs). These and the metal pipes where about $90.
I'm quite happy with the result. Now the computer won't be sitting on the dining room table anymore.
This book was fun to make.
I added a little turtle charm.
I just paper clipped the shaker pocket to this page.
Here I added a fold out page.
This tag I just laminated.
On the outside I attached a pocket.
This is the back. I glued a pocket on this side.
I made this journal card. It's from a song by Zach Williams.
These are fun to make.
I found the tutorial at: inkstainswithroni.blogspot.com, on how to stamp into UTEE.
This technique is fun to make.
I made a little pocket and added a notebook paper I made for notes.
Also added a small envelope with a paperclip.